Combining structural analysis capabilities with civil engineering specific stage analysis, pushover analysis and nonlinear time history features, midas Civil provides the necessary tools for advanced modeling, analysis and design for the bridge engineer. Features include RC, steel, PSC bridge design, suspension and cable-stayed bridge analysis, construction analysis and heat of hydration analysis, just to name a few.

Download
Code
MIDAS CIVIL V 6.3.0  
http://www.4shared.com/zip/fguC5nqD/Midas_630__full_.html
http://www.4shared.com/file/74370178/db9c7503/Midas_630__full_.html


MIDAS CIVIL 2009 (Trial)
http://www.4shared.com/file/131586198/706b64e6/Civil2009_V100_R4_Trial.html
http://www.4shared.com/file/225736070/da81233f/Civil2009_v200_trial.html


MIDAS CIVIL 2011

http://www.4shared.com/rar/4we5J72G/Midas_Civil_Version2011trial.htm

http://www.mediafire.com/?rgo2lhhyleugeol
http://www.mediafire.com/?4oqvnarf99xgcm2


Crack for  MIDAS CIVIL 2011(x64)
http://www.mediafire.com/?2xxhgx43zhd2z09
https://www.box.com/s/4ru5888cqq89b9e4xyvs

MIDAS CIVIL 2013 (Trial) 
http://199.91.154.224/uj39r4jqpotg/gbeouwnb3x4w2u0/Civil2013_v21_EN_CD.zip
http://admin.midasuser.com/UploadFiles2/76/Civil2013_v21_EN_CD.zip


Password:
cauduongbo.com
or
xd24h.com

or
www.civilea.com 

47 Comments:

  1. MIDAS CIVIL 2011 (90 days Evaluation)
    the first link not working .... please sea this problem ..

    ReplyDelete
  2. not yet my dear friend >>> http://www.mediafire.com/?2og9kpsgeu7k4zh

    ReplyDelete
  3. All Links are
    MIDAS CIVIL 2011 (Trial)
    http://www.mediafire.com/?2og9kpsgeu7k4zh
    http://www.mediafire.com/?o4cf63buxofzbvi
    http://www.mediafire.com/?to2q2y3nm6cndjl

    Are error , please fix it ...thanks

    ReplyDelete
  4. Links updated. Please have us feedback..
    Regards !!

    ReplyDelete
  5. Thanks for the trial the medcine please Admin.

    ReplyDelete
  6. I finished download v2011, then extrac....but no medicine....confirm please
    thx

    ReplyDelete
  7. The link for v 2011: http://www.mediafire.com/?6b5vcp8h5du1d0m is expired. Please update. Thanks for the help.

    ReplyDelete
  8. Dude, the link http://www.mediafire.com/?2xxhgx43zhd2z09 is a password protected file and none of these passwords you gave is working. Please kindly post the password to download it. Thanks in advance..

    ReplyDelete
  9. sorry, can you fix the link -> http://www.mediafire.com/?6b5vcp8h5du1d0m ??

    ReplyDelete
  10. pass for http://www.mediafire.com/?rgo2lhhyleugeol

    ReplyDelete
  11. For midas civil 2011,crack is for 64 bit os only. Kindly give 32 bit crack. Also after applying medicine, does this become full version (full functionality including wizards)?

    ReplyDelete
  12. Again midas civil 2011 is a trial version where one cannot enter key as you specified in medicine.Key enter field is disabled. Please help me!

    ReplyDelete
  13. http://www.mediafire.com/?2xxhgx43zhd2z09
    Pls provide the password to unlock file for above link.....
    thanks....

    ReplyDelete
  14. http://www.mediafire.com/?2xxhgx43zhd2z09
    need not to provide password becoz given passwod is working...
    thanks......

    ReplyDelete
  15. the activation key is not working , please advice

    ReplyDelete
  16. http://www.mediafire.com/?6b5vcp8h5du1d0m contain error! Please help

    ReplyDelete
    Replies
    1. You may have to use different link. I removed broken link.

      Delete
  17. How to Crack Midas Civil 2011

    1. Install Midas civil (include Sentinel), using key 058C6F5EE42007BE
    2. Extract Multikey.zip to C driver (make sure that tructure are: c:\multikey\multikey\)
    3. Run install.cmd in multikey folder
    4. Run dseo13b.exe in folder dseo13b => Chose Enable Test Mode =>Next
    5. Chose Sign a System File =>Browse to c:\multikey\multikey\MultiKey.sys =>Next
    6: Restart windows and enjoy

    ReplyDelete
    Replies
    1. When i run install.cmd in win8 64bit => error : devcon failed => MIDAS Civil still trial
      Please help me

      Delete
    2. when i run install.cmd in multikey folder => error: devcon failed => so Midas Civil still trial version again
      Please help me

      Delete
  18. Dear Administrator , where should I down load midas civil 2011? The version you provided is trial version with enter key field is disabled.Also medicine contain 64 bit system files where as my system is 32 bit.Please help me.

    ReplyDelete
    Replies
    1. I also found problem as viv.The link
      MIDAS CIVIL 2011
      http://www.mediafire.com/?rgo2lhhyleugeol
      http://www.mediafire.com/?4oqvnarf99xgcm2
      They are MS.Word documents. Please help me and thank for your repond for my above comment (April 2013).

      Delete
    2. I don't have medicine for 32bit version.

      Delete
  19. OK.then what about these MS word doccuments. Kindly give links for midas civil 2011 which contains activation key entry field.Thanks for your response.

    ReplyDelete
    Replies
    1. Why don't you download it from 4shared..?
      If you need it to download from media fire download the file and change the file extension ".doc" to ".rar".
      But I recommend to download it from 4shared.

      PS.
      Yesterday I download it from 4shared and tested.

      Delete
  20. I followed and successfully completed all 6 steps given in the post above. After restarting I launched MIDAS and entered the key number at 'Register Protection License" under Help. However when I want to start a new project, the following error pops up:

    'Lock is not detected. Please check that Lock is connected properly."

    Could someone point in me in the right direction? Thanks.

    ReplyDelete
    Replies
    1. You should repeat all steps and restart again and again.Remember that your software cannot run until this massage pops up in task bar:
      New hardware found - Usb Emulator or like wise.
      After successful installation of drivers your problem will be solved.

      Delete
    2. Viv, thanks for the help. I have got the lock working now after moving the signed MultiKey.sys file to C:\windows\system32\driver folder.

      Now I ran into another error. In MIDAS I have entered the key number 058C6F5EE42007BE (key type: stand-alone) and this message shows up:

      "Protection key number does not match."

      I directly copy-pasted the number from the readme file. What did I do wrong?

      Delete
    3. Please regard my previous comment as not sent. I've got it working now. Thanks!

      Delete
    4. I thought I had it working for a moment, but it was not the case..still the same error "Protection key number does not match."

      Did anyone had any luck installing MIDAS 2011 on Windows 7 x64?

      Delete
  21. I had also encountering the same problems, "Protection key Number does Not Match"

    ReplyDelete
  22. Same problem here..."Protection key Number does Not Match"

    ReplyDelete
  23. Dear all who are facing key problems..I have tested it tomorrow and found it correct.So you should remove all midas ,sentinel an related files.Open reg edit and delete all midas related keys because the key of previous version installed may conflict the new version.Also you have to install midas first ,then enter key and then run medicine(remember this order).Type this key manually( Do not copy paste)because there may be some "space"copied along with the key.

    ReplyDelete
  24. Got it solved with a bit of a workaround:

    1) Installed VMWare and created a virtual windows 7 x32 machine;
    2) Followed installation steps above, only use vusbus instead of multikey (can be found in the 'Emul' folder;
    3) Works like a charm! (Probably because it's a clean install as viv has indicated above?)

    Thanks for the help.

    ReplyDelete
  25. Thanks Administrator for providing Midas 2011 with a good medicine.Actually you have provided medicine for both 32 bit and 64 bit system .During installation I have learnt few things which can be helpfull for all.For new visitors kindly follow these steps:
    1. If you have 32 bit Win xp ,simply download it from 4shared or miediafire(yes,both MS word documents).If you downloaded it from Mediafire,Change extension as.rar and combine both files.Install midas with sentinel and enter key.Then run medicine(for 32 bit,it is along with these installation in emul folder).A massage will popup in task bar"new hardware found-".Restart and enjoy.
    2. If you have 64 bit Win 7,follow above steps but run different medicine which have been provided by Admin in this topic.After signing the driver you should be able to run midas civil 2011.However if it does not work,then make virtual machine (i.e 32 bit xp or 7) by vmplayer and perform clean install according to step 1.
    Tell me if these steps are helpfull to you.

    ReplyDelete
  26. Dear Viv
    i an trying the above steps in Windows 8 i am not able to do it
    one more problem is the in following step
    1. Install Midas civil (include Sentinel), using key 058C6F5EE42007BE

    where i will get the Sentinel file
    please help if any one knows

    ReplyDelete
  27. Hello dear friend VIV..... when I want to download MIDAS it ask me unlock file .... where I found this please.
    I proved with this:

    Password:
    cauduongbo.com
    or
    xd24h.com
    or
    www.civilea.com
    I can not to down the file

    ReplyDelete
  28. Dear Anonymous. If I am not wrong,you are copy- pasting the password to unlock.Please manually Type www.civilea.com in password field.Do not copy and also no need to visit these sites in internet explorer.And let me know if it works.

    @ Ashva .As I have written,"include sentinel" means installation of Sentinel Protection drivers and not any sentinel file.The links given in 4shared or mediafire contains Sentinel protection drivers along with midas installation.When you install midas,A massage will popup for installation of locks.Install Stand alone protection.
    However dear Ashva,Since you are running windows 8, I advise you to make a virtual machine of lower version i.e. win 7 or xp(32 bit).You can use vmplayer or sunbox for this.Kindly let me know if it works.

    ReplyDelete
  29. when i run install.cmd in multikey folder => error: devcon failed => so Midas Civil still trial version again
    Please help me

    ReplyDelete
  30. Why can´t see the comments?

    ReplyDelete
  31. hi, I already installed midas 2011. Thanks for your effort. Just wanna ask if someone here experience crashing midas every time you use command keys? But, all ribbons are functioning well..

    ReplyDelete
  32. can someone please upload the necessary senitel files pls.

    ReplyDelete
  33. what is the 4shared link for Midas 2011

    ReplyDelete
  34. Hey administration, maybe u've got midas civil 2013 medicines?

    ReplyDelete

 
Top