AWS Specifications and Standards

4
(Last Updated On: April 25, 2016)
aws
  • AWS A5.1 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
  • AWS A5.2 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
  • AWS A5.3 Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
  • AWS A5.4 Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
  • AWS A5.5 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
  • AWS A5.6 Specification for Covered Copper and Copper Alloy Arc Welding Electrodes R(1991)
  • AWS A5.7 Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes R(1991)
  • AWS A5.8 Specification for Filler Metals for Brazing and Braze Welding
  • AWS A5.9 Specification for Bare Stainless Steel Welding Electrodes and Rods
  • AWS A5.10 Specification for Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods
  • AWS A5.11 Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
  • AWS A5.12 Specification for Tungsten and Tungsten Alloy Electrodes for Arc Welding and Cutting
  • AWS A5.13 Specification for Solid Surfacing Welding Rods and Electrodes R(1989)
  • AWS A5.14/A5.14MSpecification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
  • AWS A5.15 Specification for Welding Electrodes and Rods for Cast Iron
  • AWS A5.16 Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
  • AWS A5.17/A5.17MSpecification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
  • AWS A5.18 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
  • AWS A5.19 Specification for Magnesium Alloy Welding Electrodes and Rods
  • AWS A5.20 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
  • AWS A5.22 Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding
  • AWS A5.23 Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
  • AWS A5.24 Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods
  • AWS A5.25 Specification for Carbon and Low Alloy Steel Electrodes and Fluxes for Electroslag Welding
  • AWS A5.26 Specification for Carbon and Low Alloy Steel Electrodes for Electrogas Welding
  • AWS A5.28 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
  • AWS A5.29 Specification for Low Alloy Steel Electrodes for Flux Cored Arc Welding R(1989)
  • AWS A5.30 Specification for Consumable Inserts
  • AWS A5.31 Specification for Fluxes for Brazing and Braze Welding
  • AWS A5.32 Specification for Welding Shielding Gases
  • AWS A9.1 Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases
  • AWS A9.2 Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases
  • AWS B1.10 Guide for the Nondestructive Inspection of Welds (Supersedes AWS B1.0-77) R(1992)
  • AWS B1.11 Guide for the Visual Inspection of Welds
  • AWS "B2.1 Standard for Welding Procedure and Performance Qualification Replaces AWS D10.9; Reprinted with Errata May 1997"
  • AWS B2.1.001 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 3/4 Inch, in the As-Welded Condition, with Backing
  • AWS B2.1-1-016Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition
  • AWS B2.1-1-017Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition
  • AWS B2.1-1-018Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition
  • AWS B2.1-1-019Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition
  • AWS B2.1-1-020Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition
  • AWS B2.1-1-022Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condit
  • AWS B2.1-1-026Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Cond
  • AWS B2.1-1-027Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E71T-11, As-Welded Condition
  • AWS B2.1-1-201Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Co
  • AWS B2.1-1-202Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Wel
  • AWS B2.1-1-203Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applicat
  • AWS B2.1-1-204Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-W
  • AWS B2.1-1-205Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Wel
  • AWS B2.1-1-206Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-W
  • AWS B2.1-1-207Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition, Primarily Pipe Applications
  • AWS B2.1-1-208Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
  • AWS B2.1-1-209Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded o
  • AWS B2.1-1-210Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/ P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condit
  • AWS B2.1-1-211Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1
  • AWS B2.1.006 Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
  • AWS B2.1.007 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Galvanized Steel, 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
  • AWS B2.1.008 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
  • AWS B2.1-8-024Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition
  • AWS B2.1-8-025Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition
  • AWS B2.1.009 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
  • AWS B2.1.010 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
  • AWS B2.1.011 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Galvanized Steel, 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing
  • AWS B2.1.012 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing
  • AWS B2.1.013 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8/P8) 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing
  • AWS B2.1.014 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing
  • AWS B2.1.015 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M-22 or P-22), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing
  • AWS B2.2 Standard for Brazing Procedure and Performance Qualification
  • AWS B4.0 Standard Methods for Mechanical Testing of Welds
  • AWS B5.9
  • AWS C1.1 Recommended Practices for Resistance Welding
  • AWS C1.3 Recommended Practices for Resistance Welding Coated Low Carbon Steels R(1987)
  • AWS C2.14 Corrosion Tests of Flame-Sprayed Coated Steel 19-Year Report
  • AWS C2.16 Guide for Thermal-Spray Operator Qualification
  • AWS C2.18 Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
  • AWS C3.2 Standard Method for Evaluating the Strength of Brazed Joints in Shear R(1992)
  • AWS C3.4 Specification for Torch Brazing
  • AWS C3.7 Specification for Aluminum Brazing
  • AWS C3.8 Recommended Practices for Ultrasonic Inspection of Brazed Joints
  • AWS C4.2 Operator's Manual for Oxyfuel Gas Cutting
  • AWS C4.3 Operators Manual for Oxyfuel Gas Heating Torch Operation
  • AWS C5.1 Recommended Practices for Plasma-Arc Welding
  • AWS C5.2 Recommended Practices for Plasma Arc Cutting R(1994)
  • AWS C5.3 Recommended Practices for Air Carbon Arc Gouging and Cutting
  • AWS C5.4 Recommended Practices for Stud Welding
  • AWS C5.5 Recommended Practices for Gas Tungsten Arc Welding R(1994)
  • AWS C5.6 Recommended Practices for Gas Metal Arc Welding R(1994)
  • AWS C5.7 Recommended Practices for Electrogas Welding R(1994)
  • AWS C5.10 Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting
  • AWS C6.1 Recommended Practices for Friction Welding
  • AWS C7.1 Recommended Practices for Electron Beam Welding
  • AWS D1.1 Structural Welding Code - Steel
  • AWS D1.2 Structural Welding Code Aluminum
  • AWS D1.3 Structural Welding Code - Sheet Steel Second Edition
  • AWS D1.4 Structural Welding Code - Reinforcing Steel
  • AWS D1.5 Bridge Welding Code
  • AWS D3.5 Guide for Steel Hull Welding
  • AWS D3.6 Specification for Underwater Welding
  • AWS D3.7 Guide for Aluminum Hull Welding
  • AWS D8.5 Recommended Practices for Automotive Portable-Gun Resistance-Spot Welding; Supplement - 1969"
  • AWS D8.7 Recommended Practices for Automotive Weld Quality-Resistance Spot Welding (SAE J 1188) R(1994)
  • AWS D8.8 Specification for Automotive and Light Truck Components Weld Quality - Arc Welding SAE HS J1196
  • AWS D8.9 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials SAE D8.9
  • AWS D9.1 Sheet Metal Welding Code
  • AWS D10.4 Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing R(1992)
  • AWS D10.6 Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing
  • AWS D10.7 Recommended Practices for Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe; Errata R(1992)"
  • AWS D10.8 Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing R(1992)
  • AWS D10.10 Recommended Practices for Local Heating of Welds in Piping and Tubing
  • AWS D10.11 Recommended Practices for Root Pass Welding of Pipe without Backing R(1992)
  • AWS D10.12 Recommended Practices and Procedures for Welding Low Carbon Steel Pipe
  • AWS D10.13 Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
  • AWS D11.2 Guide for Welding Iron Castings
  • AWS D14.1 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment R(1991)
  • AWS D14.2 Specification for Metal Cutting Machine Tool Weldments
  • AWS D14.4 Specification for Welded Joints in Machinery and Equipment R(1991)
  • AWS D14.6 Specification for Welding of Rotating Elements of Equipment
  • AWS F1.1 Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
  • AWS F1.2 Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes
  • AWS F1.3 Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
  • AWS F1.4 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
  • AWS F1.5 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
  • AWS F2.1 Recommended Safe Practice for Electron Beam Welding and Cutting
  • AWS F2.2 Lens Shade Selector
  • AWS F3.1 Guide for Welding Fume Control
  • AWS F4.1 Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
  • AWS F6.1 Method for Sound Level Measurement of Manual Arc Welding and Cutting Processes R(1989) 

 

Download

Code

AWS (American Welding Society) Specifications and Standards

Become a VIP Member to see this content

 

4 COMMENTS