Honeycomb Beam & Panel Calculations

0
(Last Updated On: March 11, 2016)
Honeycomb Beam & Panel Calculations
 This spreadsheet has been developed to allow design engineers to quickly size honeycomb panels with a minimum of work. The calculation is driven from 'Home' worksheet using a simple 5 step process.

1) SELECT Core material from drop down box:

2) SELECT skin material from drop down box:

3) SELECT Panel Loading condition from drop down box:
① Beam, Simple Support with Uniform Load Distribution
② Beam, Both Ends Fixed with Uniform Load Distribution
③ Beam, Simple Support with Central Load
④ Beam, Both Ends Fixed with Central Load
⑤ Beam, Cantilever with Uniform Load Distribution
⑥ Beam, Cantilever with Load at End
⑦ Rectangular plate, simply supported, uniform load.
⑧ Rectangular plate, clamped, uniform load.
⑨ Rectangular plate, simply supported, concentrate load over small area
⑩ Rectangular plate, clamped, concentrate load over small area
⑪ Circular plate, simply supported under uniform distributed load
⑫ Circular plate, clamped under uniform distributed load
⑬ Circular plate, simply supported under central force
⑭ Circular plate, clamped under central force

4) INPUT Panel dimensions and total load

5) READ Results - Green ticks indicate an acceptable result. Red crosses indicate an unacceptable result.

Although it is only necessary to use the 'Home' worksheet all supporting data and detailed calculations are given on other worksheets.

Download
Code

Honeycomb Beam & Panel Calculations
Become a 
VIP Member to see this content