Home Resource Calculation and Analysis

Calculation and Analysis

Download structural design calculations, design reports and model, analysis files produces by ETABS, SAP2000, STAAD.Pro, Revit Structure and Robot Structural Analysis Professional etc.

Structural Design of Steel Building and SAP2000 Model Files

Steel building of 3-Storied Steel Building (Warehouse) of Transworld Sweaters Ltd. at Bahadurpur, Banglabazar, Rajendrapur, Mirzapur, Gazipur is a gable framed with two mezzanine floor steel...

Dewatering of Soil – Objectives and Techniques

In general, dewatering means modification of ground by redirecting seepages, lowering the ground water table or in simple sense reduction of water content in foundation...

Earthquake Damage on Water Tanks

Sometimes large volume of water is required to store to meet the municipal demand or requirement of local water supply authorities. Large volume of water...

Lateral Load Testing for Micropile

We know different sources of lateral loads are applied in deep foundation and we consider deep foundation is capable of taking these loads. In this regard...

Settlement Observations of Embankment Soil Under Preloading

Monitoring of embankmentsconstructed over soft ground for preloading purpose is very important to determine the behavior of ground; this helps us by following means: •...

Determination of Cracks Width in Reinforced Concrete Member

A reinforced concreteflexure member cracks, usually, under loading well below its service load and surprisingly often even before subjected to loading; this is due...

Construction Sequence of Raft or Mat Foundation

Site selection, geotechnical investigation and structural analysis and proportioning of raft or mat foundation are done in design phase. Construction phase includes• Site preparation •...

What is Development Length for Steel in Reinforced Concrete?

Development length can be defined as a length of reinforcing bars into embedment of concreterequired to develop full tensile strength of them. This length depends on...

Causes of Microcracking in Concrete

Microcracking in concrete is very important issue which is formed in microstructure. The causes of microcracking are manifolds; in simple word, the main causes...

Basic of Flexure Bond in Reinforced Concrete

In reinforced concrete, steel is provided to strengthen it against tension force and in many cases compression forces too; it is used to counteract...